9 mm x 26 mm x 8 mm FAG 129-TVH Self Aligning Ball Bearings

L1:70 mm; SW:3.18 mm; T max.:200 °C; B:30 mm; H:102 mm; N1:16 mm; Designation of open end cover:SCOU206-20; Designation of housing:T206N-; C:19.5 kN; L3:57 mm;

rNa max:0.3 mm; D4 max:36.7 mm; Ca min:3.02 mm; Characteristic rolling element frequency, BSF:4.73 Hz; Radial clearance class:C3; D3 max:30.15 mm; Da max:30 mm; Static load, C0:2.83 kN; a max:2.06 mm; b min:1.35 mm;

A1:22 mm; s1:15.5 mm; B:31 mm; T max.:200 °C; H1:11 mm; d:19.05 mm; Dz:54 mm; E:13 mm; H2:62 mm; T min.:-20 °C;

v:70 mm; recommended torque:2,040 Nm; g1:92 mm; l1:387 mm; d3:TR220x4; d:220 mm; a:880 mm; D:400 mm; h:310 mm; d1:230 mm;

Designation of housing:FL211N-; H:224 mm; L:130 mm; A1:18 mm; G:M6x1; e:25 mm; T max.:100 °C; d:50.8 mm; A:43 mm; Designation of bearing:US211-32G2;

Retainer Material:Polymer; Grease Type:Mobilith SHC PM 220; Expansion Type:Non-Expansion; d:1.3750 in; Bearing Series:207 Series; Housing Coating:Powder Coat; Seal Type:Triple Lip; Bearing Family:Setscrew Ball Bearin; Housing Material:Cast Iron; Base to Center Height:Not Applicable;

L:190 mm; G:M6x1; H2:157 mm; A1:36 mm; T min.:-20 °C; L1:62 mm; Weight:2.97 kg; N:17mm; A:70 mm; N1:25 mm;

Recommended tightening torque for set screw:8 Nm; B1:35.7 mm; C:16 mm; D:62 mm; G:5/16-24UNF; T min.:-40 °C; C0:11.2 kN; S:9 mm; SW:3.97 mm; r:0.6;

L:117 mm; e:19 mm; N:14mm; Dz:80 mm; G:M6x1; A2:44.4 mm; Z:48.3 mm; C0:15.2 kN; T min.:-20 °C; Designation of open end cover:SCOU207-23;

T min.:-40 °C; N1:25 mm; C:43.55 kN; G:M6x1; Designation of bearing:UC211G2T04; H:63.5 mm; S:22.2 mm; Recommended tightening torque for set screw:22 Nm; T max.:100 °C; Z:77 mm;

UPC:782475266029; Special Coating:STANDARD PAINT; Screw Diameter:1.2500 in; Material Type:CARBON STEEL; Screw Treatment:ZINC PLATED; Take-Up Frame Travel:30.0000 in; Take-Up Frame Style:HEAVY DUTY; Brand:Baldor-Dodge; Frame Size:400; Angle Size:5 X 5 X 1/2;

T min.:-20 °C; H1:16 mm; Recommended tightening torque for set screw:5.5 Nm; Designation of bearing:US205G2T20; Designation of open end cover:SCO205-25; Dz:60 mm; C0:7.88 kN; s1:13.5 mm; B:27 mm; N1:19 mm;

T max.:100 °C; S:12.7 mm; C0:6.65 kN; N:11,5mm; J:90 mm; Designation of bearing:UC204G2L4; A:30.3 mm; L:61 mm; A2:37.3 mm; e:19 mm;

d:50.8 mm; A3:2.5 mm; S:27.7 mm; d1:74.5 mm; T max.:100 °C; A5:27.7 mm; A:35 mm; H:125 mm; s1:48.4 mm; SW:4.76 mm;

S:14.3 mm; N:12mm; e:10 mm; B:34 mm; Designation of housing:FC205N-; H3:70; C:14 kN; A1:7 mm; s1:17 mm; A4:21 mm;